Parametric Desiccant Box

Customize your own desiccant box using Bambu's new Fusion 360 customizer. Configure a box with your own parameters in a few minutes. Use them for your AMS's, dry boxes, food storage or any other purpose.Configure:-Width, depth and height of the box-Hole size between 1.5mm and 3mm-Wall thickness between 1mm and 3mm-Tightness of the snap-on lid The project includes a profile for AMS desiccant boxes for the original AMS and the new AMS 2 Pro Customizer Instructions:Select “Customize” from the project page and configure the parameters shown below.Printing Instructions:Once you have the file open in Bambu Studio, make sure you are using the correct printer, build plate and filament. The customizer uses “Cool Plate” as the default, so make sure and check which plate you are using. The box should print fine with standard .2mm profiles. Remember to change the infill pattern from “Grid” to “Rectilinear, ”Gyroid" or other infill pattern that does not cross over itself.Thanks for look