Parametric Drying Rack fix - Drying rack repair

English:This model is 100% parametric. I’ve exposed every critical dimension so you can adjust it to any drying rack (of the same kind) on the market. I'm using multiple of them since weeks quite intensively with no issue. Everything's been printed in PLA+.1. The Horizontal Clip (The "Snap" part)hp_d_int (4.6mm): This is the inner diameter. Measure your rack's rod with a caliper and add about 0.1mm for a perfect fit.hp_thickness (1.5mm): The wall thickness. 1.5mm is the sweet spot: enough flex to snap, enough beef to stay put.hp_slot_angle (270°): This defines the "C" opening. At 270°, it wraps around the rod enough to lock it, but still lets you snap it on without breaking the plastic.hp_length (20mm): The total width of the clip. Increase this if you want more grip surface.2. The Main Pipe (T main body)pipe_d_int (4mm): The diameter for the rod going into the T-joint.pipe_thickness (1.5mm): Matches the horizontal part for a clean, sturdy look.pipe_length (