Parametric Electronics Box +TPU Gasket

Parametric electronics box designed in OpenSCAD. You control only a few simple sliders; everything else is automatic (screw layout, lip fit, corner radii). Optional edge gasket adds a TPU sealing ring. A dedicated Print view lays the tub, lid and gasket side-by-side for instant slicing.Quick startChoose screw type: screw_type = 0 (M3), 1 (M4) or 2 (Custom).Set box size & strength: box_w (width), wall_t (walls), lid_th (lid).(Optional) Edge gasket: turn gasket_enable ON and set gasket_tpu_w (TPU ring width).Switch ui_view_mode = 4 (Print) → parts appear side-by-side.Export (STL/3MF) and slice. Print tub & lid in PLA/PETG, gasket in TPU.Parameters explained (only the sliders you see)Scalescale factor — global scale. Keep 1.0 (recommended).scale holes — if ON, holes and grooves scale too. Keep OFF for accurate screws and gasket.Box size / strengthbox w — overall width (X). Length/height use safe defaults in the file.wall t — wall thickness; use multiples of 0.4 mm (2.4 mm is a good start)