Thingiverse
Parametric Electronics Enclosure
door tpimh
15
Downloads
8
Likes
0
Makes
Requirements: OpenSCAD, [fasteners library](https://github.com/txoof/OpenSCAD_fasteners/blob/master/nuts_and_bolts.scad), [fingerjoint library](https://github.com/txoof/fingerjoint/blob/master/fingerjoint.scad).
This model is currently using laser-cut parts, 3D-printed parts and off-the-shelf parts.
To build a custom box you would need rigid laser-cuttable sheet material, 8 3D-printed corners, 4 M2 hex-pillars, 16 M2 hex-nuts and 24 M2 countersunk screws.
# Links
- [GitHub project](https://github.com/tpimh/screw_interconnect)
- [Hackaday page](https://hackaday.io/projects/hacker/245878)
This model is currently using laser-cut parts, 3D-printed parts and off-the-shelf parts.
To build a custom box you would need rigid laser-cuttable sheet material, 8 3D-printed corners, 4 M2 hex-pillars, 16 M2 hex-nuts and 24 M2 countersunk screws.
# Links
- [GitHub project](https://github.com/tpimh/screw_interconnect)
- [Hackaday page](https://hackaday.io/projects/hacker/245878)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
