Thingiverse
Parametric hose adapter
door stonetronics
54
Downloads
150
Likes
0
Makes
An adapter to fix silicon tubing to a container e.g. plastic canister
The plug is sealed by an O-ring and countered by a nut (can be hand-tightened)
The STL files in the upload should work for 4mm - 5mm inner diameter tubing and a 10mm drill hole in the container. The O-ring used has 15mm outter diameter and 2.5mm cross-section diameter. Parameters ca be set to fit your equipment etc
Feel free to download the FreeCAD file and edit the parameters to your need.
Best print in PETG.
Plug 100% infill, Nut 30% infill
Seam position random to get a more homogenous thread.
The plug is sealed by an O-ring and countered by a nut (can be hand-tightened)
The STL files in the upload should work for 4mm - 5mm inner diameter tubing and a 10mm drill hole in the container. The O-ring used has 15mm outter diameter and 2.5mm cross-section diameter. Parameters ca be set to fit your equipment etc
Feel free to download the FreeCAD file and edit the parameters to your need.
Best print in PETG.
Plug 100% infill, Nut 30% infill
Seam position random to get a more homogenous thread.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
