Thingiverse
Parametric L bracket - to keep things stationary
by marcham007
0
Downloads
1
Likes
0
Makes
A good friend of the Corner Bracket also available from my things .... The parametric L bracket is perfect to stop things from moving around (like on a boat or RV).
Suggest printing in PETG (indoors) or ASA (outdoors) with 5 wall layers and 5 top/bottom layers with 20 pct gyroid infill. Bonus is that with PETG and a light sand with 400 grit, 3M VHB will stick to it very well (make sure you remove any remaining bed adhesive).
You will need the latest nightly release of OpenScad (do NOT use 2021.01.
Once you've played around with the parameters, don't forget to hit generate before you export the STL.
https://openscad.org/downloads.html#snapshots
Suggest printing in PETG (indoors) or ASA (outdoors) with 5 wall layers and 5 top/bottom layers with 20 pct gyroid infill. Bonus is that with PETG and a light sand with 400 grit, 3M VHB will stick to it very well (make sure you remove any remaining bed adhesive).
You will need the latest nightly release of OpenScad (do NOT use 2021.01.
Once you've played around with the parameters, don't forget to hit generate before you export the STL.
https://openscad.org/downloads.html#snapshots
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
