Thingiverse
Parametric Microphone Clip
di Tuxt
2
Download
3
Likes
0
Makes
It's a simple parametric microphone clip coded in OpenSCAD.
I just printed a microphone table stand and the clip didn't fit mine (it ended up breaking off). So I made a parametric clip to fit the measurements I needed and the bolts I had available.
At the beginning of the file are the configuration parameters, which are indicated in the images. (**_When you measure D1 and D2, make sure there is a distance L between the measured diameters_**)
_If you want to know: The table stand that appears in the images is from [this design](https://cults3d.com/es/modelo-3d/artilugios/microphone-stand-joschkriebler)_
I just printed a microphone table stand and the clip didn't fit mine (it ended up breaking off). So I made a parametric clip to fit the measurements I needed and the bolts I had available.
At the beginning of the file are the configuration parameters, which are indicated in the images. (**_When you measure D1 and D2, make sure there is a distance L between the measured diameters_**)
_If you want to know: The table stand that appears in the images is from [this design](https://cults3d.com/es/modelo-3d/artilugios/microphone-stand-joschkriebler)_
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
