Tools
Vai al Modello
Parametric Vise Soft Jaws
385
Download
190
Likes
8
Makes
This is a set of parametric vise soft jaws. This model is base on my previous Vise Soft Jaw Design (http://www.thingiverse.com/thing:1376177).
The length and width of the soft jaws can be altered to accommodate any vise. As well the knurling pattern on the front jaws face can also be altered. A V-groove has also been included for holding round materials.
Below are all the dimensions that can be adjusted.
//vise dimensions
viseLength = 100;
jawWidth = 12.7;
thickness = 6.35;
//knurl pattern settings
knurlAngle = 45;
knurlWidth = 0.5;
knurlDepth = 2;
knurlSpacing = 7;
//v groove size
vGrooveSize = 10;
//Dimensions of magnets
magnetSize = 5.1; //oversize magnet hole slightly to ensure close fit
magnetSpacing = 25;
Edit: The V-groove position can now be adjusted. As well there is an option to choose either circular or cubic magnets.
The length and width of the soft jaws can be altered to accommodate any vise. As well the knurling pattern on the front jaws face can also be altered. A V-groove has also been included for holding round materials.
Below are all the dimensions that can be adjusted.
//vise dimensions
viseLength = 100;
jawWidth = 12.7;
thickness = 6.35;
//knurl pattern settings
knurlAngle = 45;
knurlWidth = 0.5;
knurlDepth = 2;
knurlSpacing = 7;
//v groove size
vGrooveSize = 10;
//Dimensions of magnets
magnetSize = 5.1; //oversize magnet hole slightly to ensure close fit
magnetSpacing = 25;
Edit: The V-groove position can now be adjusted. As well there is an option to choose either circular or cubic magnets.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!