Parfguide-storage 8x3

English(Deutsche Beschreibung siehe unten)I offer the hex-bit-storage in several variations:This version offers room for the Parfguide System Mk 2 bits and tools.Other variants are:7 x 3 bits only8 x 3 bits only8 x 3 bits plus Wera RapidaptorThe backs fits on all french cleat systems which are at least 6mm strong. Calibration (optional)Print the 1x1 scaling model at first an test the fit of your hex bits. Optimize the fitting to your needs by adjusting the scale factor in your slicer.If you have found the right scale factor that suits you, then apply it to all prints on all dimensions (including z) - even on the french cleat holder, so the width and the position of the screw holes stills fits to the hex bit storage .The z dimension needs also adjustment, so you still have a 45° angle for the french cleat! AssemblyUse two wood screws 3,0 x 10mm or 3,0 x 12mm to mount the pieces together. Be careful with the right screw! Because of the diameter of the drill guides I had to shorten the sc