Thingiverse
Parkflyer Screaming Fly
by Parkflyer_EU
197
Downloads
193
Likes
0
Makes
It's a approx. 230 g frame for freestyle or race.
Sure, if it flies unbraked into a wall, it's broken. But then the 3D printed parts are the smallest problem. ;)
Recommended set up:
2300 KV Motors
30 A ESC
4s LiPo (C-Rate 90 A)
5” Propeller
Screw-Set Frame:
M3 x 45 mm Hex Screw, 6 pcs.
M3 x 25 mm Hex Screw, 25 pcs.
M3 x 20 mm Hex Screw, 4 pcs.
M3 x 10 mm Hex Screw, 2 pcs.
M3 Lock Nut, 26 pcs.
M3 Nut, 11 pcs.
Flat Washer for M3 Screw, 68 pcs.
Arms:
Carbon Tube 14 x 88 mm, 2 pcs.
Carbon Tube 14 x 76 mm, 2 pcs.
Recommended electric components:
Motor: 2300-2600KV
ESC: 30A
Flight Controller (FC): SP Racing F3 or a other FC with a F3/F4 Chip
https://www.parkflyer.eu/brushless-powersysteme/
Sure, if it flies unbraked into a wall, it's broken. But then the 3D printed parts are the smallest problem. ;)
Recommended set up:
2300 KV Motors
30 A ESC
4s LiPo (C-Rate 90 A)
5” Propeller
Screw-Set Frame:
M3 x 45 mm Hex Screw, 6 pcs.
M3 x 25 mm Hex Screw, 25 pcs.
M3 x 20 mm Hex Screw, 4 pcs.
M3 x 10 mm Hex Screw, 2 pcs.
M3 Lock Nut, 26 pcs.
M3 Nut, 11 pcs.
Flat Washer for M3 Screw, 68 pcs.
Arms:
Carbon Tube 14 x 88 mm, 2 pcs.
Carbon Tube 14 x 76 mm, 2 pcs.
Recommended electric components:
Motor: 2300-2600KV
ESC: 30A
Flight Controller (FC): SP Racing F3 or a other FC with a F3/F4 Chip
https://www.parkflyer.eu/brushless-powersysteme/
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!