Thingiverse
Parrot miniclone
by jaaklab
25
Downloads
24
Likes
0
Makes
Super powerful 2 wheelers
3D printed body (abs) and homemade Airless tyres (filaflex)
body printed in 0.4mm wheel 0.3mm
https://www.youtube.com/watch?v=h7F0CQD5Gz0
ultra cheap!!, 2 motors and 2 car ESC+3s lipo
and devo7 Radio (from my old ladybird)+rx walkera
2 brushless 2830 1100kv (far too much)
Nearly incontrolable with 97% expo on thrust and rudder
esc acceleration set to 0!!!
i'm gonna try on 2S lipo to get some control on the raging beast
awful noise from low rpm brushless, i've got to get rid of that!
listof material
2X http://www.hobbyking.com/hobbyking/store/__8495__Turnigy_2830_Brushless_Motor_1000kv.html
2X http://www.hobbyking.com/hobbyking/store/__14630__Turnigy_TrackStar_25A_1_18th_Scale_Brushless_Car_ESC.html
1 radio tx+rx
1 lipo 3S 1000mAh maybe 2S is enough
3D printed body (abs) and homemade Airless tyres (filaflex)
body printed in 0.4mm wheel 0.3mm
https://www.youtube.com/watch?v=h7F0CQD5Gz0
ultra cheap!!, 2 motors and 2 car ESC+3s lipo
and devo7 Radio (from my old ladybird)+rx walkera
2 brushless 2830 1100kv (far too much)
Nearly incontrolable with 97% expo on thrust and rudder
esc acceleration set to 0!!!
i'm gonna try on 2S lipo to get some control on the raging beast
awful noise from low rpm brushless, i've got to get rid of that!
listof material
2X http://www.hobbyking.com/hobbyking/store/__8495__Turnigy_2830_Brushless_Motor_1000kv.html
2X http://www.hobbyking.com/hobbyking/store/__14630__Turnigy_TrackStar_25A_1_18th_Scale_Brushless_Car_ESC.html
1 radio tx+rx
1 lipo 3S 1000mAh maybe 2S is enough
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!