Patriot Headset Stand

This is a gaming headset stand that I designed for my nephew. He has two things he loves. Gaming and guns. I decided to bring those two together in this design. It has been tested with Audeze Maxwells, Arctis Nova Pros, and Arctis Steel Series 9. I am sure it will work with nearly any headphone model, but these three are confirmed to have clearance to charge on the stand.   This is designed as a single print with multiple filaments. While you could print it just fine in one solid color, this is set up so that if you do not have an AMS or ACE or other filament changing device, it is easy to do manual changes at different heights and produce the same results as seen in the photos. It also has the pieces broken up into labeled parts that are easy to assign colors in the slicer.   If you plan to use different filament types that don't stick to each other well (PLA with PETG, or PLA with COPE), you will peobably want to cut the model in the slicer then glue them together. I don't recommend using say a PETG where the grey part is in a model that is printed with PLA everywhere else. They just fon't stick to each other well.   The model shown in the picture was printed with a .6 nozzle at .24 layer height and fairly quick. A .4 nozzle and/or smaller layer height will produce even better results, but my nephew was happy with the prototype. I added the “We the People” embossing in the top of the stand after the prototype, so it is not shown in the finished pictures but is there.