Paul walker

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:Pla JAYO Black Transmission Distance: 0.3Pla JAYO Gray Transmission Distance: 2.5Pla GEETECH Gray Transmission Distance: 3Pla JAYO White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.56mm) swap to