Thingiverse
Paulchen Pfiffig
by juh
0
Downloads
0
Likes
0
Makes
A recreation of a fischertechnik giveaway from the 1970s.
Made with https://www.tripo3d.ai/ from a photo shared by Geert from the ftcommunity: https://forum.ftcommunity.de/viewtopic.php?f=6&t=8587&p=66327#p66327
The scale tripo3d chose is tiny, just zoom it to the desired height in your slicer.
To print this use Cura's rotate/lay flat function so that both feet touch the base plate, together with a raft for adhesion. Alternatively, move the model a tiny bit below the base plate (e.g. set Z to -1mm), this will cut a little from the bottom, but will result in a more stable standing model.
Use 2-3 walls, no infill, no support.
Made with https://www.tripo3d.ai/ from a photo shared by Geert from the ftcommunity: https://forum.ftcommunity.de/viewtopic.php?f=6&t=8587&p=66327#p66327
The scale tripo3d chose is tiny, just zoom it to the desired height in your slicer.
To print this use Cura's rotate/lay flat function so that both feet touch the base plate, together with a raft for adhesion. Alternatively, move the model a tiny bit below the base plate (e.g. set Z to -1mm), this will cut a little from the bottom, but will result in a more stable standing model.
Use 2-3 walls, no infill, no support.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
