Pawsitively Hissterical

The one and only Paws!
I will update this as I remember things that I have missed.
Almost all printed in 98a tpu, I have no idea if 95a will work, my guess is that it wouldn't be strong enough but give it a shot! You don't need to print them solid but I like chonky walls and 20-30 infill, try things out. Paws has always been a lot of trial and error.
Drive motors are Just Cuz hr gearboxes mated to repeat compact motors. I need the extra torque and I do not like brushed motors. The hubs for the motors are servo city clamp hubs. I also use just cuz motor mounts, but you could make your own easily enough. For the front dead shafts I use the shafts and face plates from old brushed motors. I have a bunch laying around but you could easily use the 6mm shaft upgrade kit from Just Cuz
I've ran it on 3s and 4s with no problems. You can use almost any ESC, switch, or electronics kits as long as they can handle the voltage.
I have 2 different types of the feet. One has a single slot fo