PC Riser – Thermaltake Core V1

This is a simple riser to allow airflow to the GPU if the Thermaltake Core V1 is mounted on its side.To achieve this i also had to move the power button, which was just drilling a couple holes - pictures included!(make sure you test fit with the cover before drilling, dont rely soley on the factory hole dimensions..) Parts split into 2 as the corners cant have the same shell settings as the sides. I couldn't figure out how to have 2 plates slice differently so I just uploaded the parts as 2 different profiles.The corners simply slide in using a dovetail, no tools or glue required.RAW file included to remix for different dimensions if you have a similar problem on a different case! Riser dimensions = 260x260x25mm Recommended PETGProfiles - P1S using 0.4 Nozzle SIDE SETTINGSTop Shell Layers - 0Bottom Shell Layers - 0Sparse Infill Density - 7%Sparse Infill Pattern - HoneycombInfill Direction - 0* CORNER SETTINGSTop Shell Layers - 3Bottom Shell Layers - 3Sparse Infill Density - 5%Spars