Thingiverse
PCB drill, mini drill
door Desibeli2010
9
Downloads
12
Likes
0
Makes
Good and sturdy mini drill for PCB manufacturing.
Mini drill or PCB drill. Use 540 RC car motor.
You need 2 pcs 89 mm long 8 mm rods.
And M 4 X 16 mm screw 4 pcs, M 4 X 6 mm screw 2 pcs, M 3 X 10 mm screw 4 pcs.
M 4 nut 1 pcs, one or two M 4 warher,
M 6 X 50 mm 1 pcs, M 6 X 80 mm 1 pcs and M 6 nut. One or two M 6 washer.
Drill M3 and M4 threads use threaded pin.
In the picture has been used "runko iso" file.
you can use an elastic band to lift the drill up.
Nozzle 0.4 mm
Layer 0.2 or 0.25
Mini drill or PCB drill. Use 540 RC car motor.
You need 2 pcs 89 mm long 8 mm rods.
And M 4 X 16 mm screw 4 pcs, M 4 X 6 mm screw 2 pcs, M 3 X 10 mm screw 4 pcs.
M 4 nut 1 pcs, one or two M 4 warher,
M 6 X 50 mm 1 pcs, M 6 X 80 mm 1 pcs and M 6 nut. One or two M 6 washer.
Drill M3 and M4 threads use threaded pin.
In the picture has been used "runko iso" file.
you can use an elastic band to lift the drill up.
Nozzle 0.4 mm
Layer 0.2 or 0.25
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
