Pencil Case

So as I mentioned, this beautiful pencil is also a pencil case! :). It is big enough for plenty of pens, pencils, rubbers and compassesIts designed for no need of other non-printable stuff, like bolts, nuts and other accessories. Just printed parts, some filament for joints and little bit of glue.. that's everything you will need! And assembly is very easy! Slicer settings:I used PLA and its sufficient, but you can also use PETG for more durability2 perimeters are enough20% infillfew parts need some supports, but most of them are supportless!All threads are modeled with some clearance to work well after assemble. How to assemble: Apply some glue on part “base_top”Put “base_top” inside of part “base_bottom”Again place some glue on the bottom of the part “base_bottom”, and also on part “copper_thing” on the middle mild holes Put “connector_pin” into some of the two holes, and stick those two big parts together. The connector serves for perfect centration.And that's all! Enjoy you