Pencil Style Bit Driver for 5 Bits

You already have the mini bit driver (https://makerworld.com/de/models/36181#profileId-34043) and the mini double bit driver (https://makerworld.com/de/models/36767#profileId-34998)? Now you want more? More bits to carry with you? Ok, I hear you - here is the solution to a problem you never had: The Pencil Style Bit Driver fo 5 Bits This bit driver can carry five standard bits. One at the tip and four more inside. With a handy clip and a length of 145mm it fits in most of your pockets. Print everything with a layer height of 0.16mm, 3 walls, 5 tops, 4 bottoms and 8% gyroid infill. Support is not necessary.I recommend using a brim on the large middle section, that will improve the bed adhesion. Another recommendation is to keep the layer height of 0.16mm. You can go smaller but a larger layer height can result in non-working threads. The overhangs are a little bit delicate. To optimize overhangs you can set the layer time to 7 or more seconds. This will help to cool the layers before th