Pendant Lamp version-01

This lamp has been completely designed and developed by the creator, RRC.Uses less than 60g of total filament.PETG-36.3 gms , PLA-16.18 gms. 1. GeneralAll dimensions are in millimeters (mm).Do not scale the model.3D print only; no machining unless specified.2. Lamp Head – PETGMaterial: Clear Transparent PETGOverall Size: 120 × 120 × 120Bulb Inlet Opening: Ø 603. Housing – PLAMaterial: Generic PLAOverall Size: 58 × 58 × 58Socket Opening: Ø 28.9Designed for: Indian market bulb holdersCompatible Brand: Goldmedal (GM) Which is used can be other brand also works buy holders according to the given dia mentioned above.can find holders with that size very easily.Supports Required bit sanding aslo might required because of overhang.Socket opening designed for press fit / snug fit with GM bulb holder.Do not modify socket diameter without physical test fit.Housing to be inserted into lamp head after print completion.Ensure no sharp edges near wiring paths.Verify bulb holder seating before final a