penguin christmas

Project: pingu.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x96.86mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: ABS Sunlu Black Transmission Distance: 0.3 ABS Amazon Blue Gray Transmission Distance: 3 ABS Bambulab Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #15 (1.28mm) swap to White for the rest.