Pennhurst Asylum Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.33mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #00358e PLA BambuLab Basic Blue Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Black At layer #9 (0.8mm) swap to Blue Gray At layer #13 (1.12mm) swap to Jade White At layer #19 (1.6mm) swap to Blue Gray At layer #22 (1.84mm) swap to Blue At layer #26 (2.16mm) swap to Jade White for the rest. Feel free to change the colors. Steps to assign each color:import stl into bambu labadd number of colors that you intend to use. First one (primary, should be the lowest one on your hueforg