MakerWorld
Hueforge & Lithophane
Ver Modelo
Pennywise Hueforge
18
Descargas
16
Likes
3
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x202.48mm in sizeYou may print at higher layer heights below the Min Depth of 1.5mmThe Max Depth is 4.3mm and the Actual Depth is 3.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 Sunlu Dark Gray Transmission Distance: 2.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #21 (1.76mm) swap to Dark Gray At layer #26 (2.16mm) swap to Red At layer #31 (2.56mm) swap to Gray At layer #39 (3.2mm) swap to White for the rest.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
