Thingiverse

Peon230 - Quadcopter

por Tech2C

11.1k Descargas

8.9k Likes

168 Makes

Ver Modelo

Designed for strength, function and light weight, build yourself this 230 size Quadcopter frame.

All parts printed at 0.2mm layer height and 3 perimeters.

-Top and Bottom frames, HDcam and FPVcam @ 30% infill x 1 of each
-Arms @ 100% infill x 4
-ArmSupport @ 100% infill x 2

http://youtu.be/-e-3kbXzwzk
http://youtu.be/jaZK9bDb17U
http://youtu.be/BU2Z-EG56js

**Suggested Setup:**
-Motor: [RacerStar 1806 2280kv](http://www.banggood.com/4X-Racerstar-Racing-Edition-1806-BR1806-2280KV-1-3S-Brushless-Motor-CWCCW-For-QAV250-ZMR250-260-p-1073527.html?p=9X051049165582016063) or [Racerstar 2204 2300KV](http://www.banggood.com/4X-Racerstar-Racing-Edition-2204-BR2204-2300KV-2-3S-Brushless-Motor-CWCCW-For-QAV250-ZMR250-260-280-p-1072705.html?p=9X051049165582016063)
-ESC: [Racerstar RS20Ax4 20A 4 in 1 (inbuilt PDB)](http://www.banggood.com/Racerstar-RS20Ax4-20A-4-in-1-Blheli_S-Opto-ESC-2-4S-Support-Oneshot42-Multishot-for-FPV-Racer-p-1068210.html?p=9X0510491655820160

230 drone E3D fpv fpv racer multicopter peon peon 230 Quadcopter racer 230 drone E3D fpv fpv racer multicopter peon peon 230 Quadcopter racer 230 drone E3D fpv fpv racer multicopter peon peon 230 Quadcopter racer

Fuente

Thingiverse

Lo que necesitas para imprimir: Principiante Baja confianza

¿Por qué?

capas de 0.20mm

Pieza única

Soportes 1/3

Ensamblaje 0/3

Ajustes 1/3

Tamaño de cama 0/3

Postproceso 0/3

Impresora

FDM / FFF

Formato de archivo

STL

Material

Altura de capa

0.2 mm

Software

Cura, PrusaSlicer o similar

Aún no hay valoraciones

Aún no hay comentarios – ¡sé el primero!

Peon230 - Quadcopter

Añadir a colección