PERFORMANCE OPEN RC F1 CAR

PERFORMANCE OPEN RC F1 BUILD GUIDE

Note: Building procedure similar to original open RC f1. Also check Daniel Noree´s Youtube videos.

I will leave some photos so that you can reference and make the build easier.

Hardware: We are using the same bearings, electronics and bolts, but you will have to buy a pinion gear from amazon in order to avoid gear slippage.

https://www.amazon.es/Crazepony-UK-3-175mm-Pinion-Brushed-Brushless/dp/B07CK5K25S/ref=sr_1_fkmr0_1?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=pinion+gear+1.175+shaft&qid=1598955523&sr=8-1-fkmr0


First Step: (bottom plates)
Printer settings: 40-50 infill, 2-3 perimeters, 0.28 layer height for more speed.
Trimmed edges reduce weight while permitting a wide variety of tire dimensions.


Second step: (Rear axle assembly)
Printer settings: 100% infill, 3 perimeters, 0.2 layer height.

Rear axle now has hexagonal ends for the rims to fit better. You MUST SAND THE AXLES before inserting rims, othe