Thingiverse
Pergo Tag-Along
by Pergo
13
Downloads
15
Likes
0
Makes
I give you the largest project I've designed to date. Projects with Moving parts and lot of them are not simple! It's final design is my version #4 of just under a year of work. Don't let it's simple looks fool you, it was a lot of work. I think it has some issue that may be reworked here and there but I needed to remember that many people can't print items larger than my chosen size of the "Deck Plate" part. I would like a wider wheel base which would give better stability. I was amazed of how much weight this thing could accommodate, and the more weight on it the more stable it was.
The Pipe is standard 1/2" PVC schedule 40 white. You can remove all those nasty printing on the pipe with a small wire brush or scrape back and forth with a pocket knife.
To attach all items to the pipes. I drilled a small pilot hole near the connecting base and and screwed a screw in that goes through the pvc pipe and into the 15.3mm knobs that stick up. You could use pvc glue if you like but I don'
The Pipe is standard 1/2" PVC schedule 40 white. You can remove all those nasty printing on the pipe with a small wire brush or scrape back and forth with a pocket knife.
To attach all items to the pipes. I drilled a small pilot hole near the connecting base and and screwed a screw in that goes through the pvc pipe and into the 15.3mm knobs that stick up. You could use pvc glue if you like but I don'
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!