PeRL - Tiltable

This is a tiltable version of the PeRL I've remixed to engrave tumblers. Theres probably a fancier way to tilt it but this was a quick design solution.

I've included the cone head I use as idle grip.

I also use a four jaw centering chuck (https://www.thingiverse.com/thing:5791) that I couple to the motor with a RIGID coupler. I use some modified jaws to be able to grip larger bottles.

Follow the instructions from the original PeRL for most of the assembly and for the parts list (https://www.thingiverse.com/thing:3729460).

You will need some extra hardware:
2x 1/4-20x1" - Hex bolt
2x 1/4-20 - Wing nuts
1x 1/4-20 - nut
1x 1/4-20x4.5" - Square neck bolt. I used a 6" bolt and cut it to size.
1x 5/16x3.5" - Hex bolt
1x 5/16 - Nut

The assembly is pretty straight forward, the pictures should give you a pretty good idea how to assemble it. The two towers are meant to be 380mm apart.


Thanks to TommasoEngineering for the original design. I've used it for some time