PET Bottle Cutter

This is a PET bottle cutter.It uses 2 608zz ball bearings to cut the PET bottles. The bearings must be sharpened with an angle grinder to be able to cut.Full Bom2 M8x50 hex screws{holds the bearings1 M8x30 hex screw with a cut on it which serves as a guide. with this screw you can adjust the width of the strip that needed to be cut.4 M8nuts2 M8 nylon nuts3 M8 washers1 M5 nut1 M5 threaded rod which serves as a botlle holder4 M4x30 allen screws which fix the cutter onto a piece of wood, a table and so onThis cutter is part of an entire machine. You cand find it on etsy. https://www.etsy.com/listing/1501105570/3d-filament-making-machine-from-pet