Thingiverse
Pet Exercise Wheel Cage Bracket
von Scooterbot
28
Downloads
27
Likes
0
Makes
Many small pet exercise wheels have stands that make cage maintenance difficult. This bracket allows you to mount the wheel against the side of the cage so that it is out of the way of any bedding material.
There are currently two versions: One for cages with angled sides, and the other for straight sides. The bracket will fit any horizontal bars that are 21 to 23mm apart and with a diameter of 3mm or smaller.
I would recommend printing the bracket as shown in the pictures with support material between the arms. This will put the printing layers perpendicular to the cage bars making the bracket much stronger.
Please leave a comment if you need a bracket with different dimensions!
There are currently two versions: One for cages with angled sides, and the other for straight sides. The bracket will fit any horizontal bars that are 21 to 23mm apart and with a diameter of 3mm or smaller.
I would recommend printing the bracket as shown in the pictures with support material between the arms. This will put the printing layers perpendicular to the cage bars making the bracket much stronger.
Please leave a comment if you need a bracket with different dimensions!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!