Pet Food Riser v2

Here is the Pet Food Riser v2! Sized to be printed on an H2 series printer, this riser holds two bowls with an ID of 4.75in. You can find compatible bowls on amazon. The 1 cup, 1.5 cup, and 2.2 cup sizes should fit comfortably. You should be able to scale appropriately if using different sized bowls. There are three main components. The two sides, and the nameplate in the middle. I've included appropriately sized dowels as well. The last plate of the print profile is for sizing and making sure that everything will fit right if you feel inclined to test it, but it should fit well. I added a dab of CA glue inside the dowel holes to make sure everything fits tight and doesn't come apart. Feel free to add your own text to the nameplate to personalize! I printed in PETG with Support for PLA/PETG as interface material. Please be aware of material selection when printing (especially H2S owners) You can find my v1 here. This was sliced to print on the X1C an similar sized printers, and