Phantom 3 motor mount reinforcing bracket.

Use this bracket to add strength to the motor mount of the Phantom 3 where cracks sometimes occur.

You will need to print 4 of them. One for each bracket and use M3 - 10mm screws to replace the original screws. They are available at Lowes. Home Depot didn't have them.

EDIT: Now with a second file which have 6 screw holes to hold the shell together. I can't tell you what screws you need for the shell but they are smaller and longer than the M3 -10MM screws.

If anyone finds the correct screws please let me know and I will post.

If you want to sell my design on eBay or anywhere else you must ask my permission first.