Phantom 3 Payload Bridge

The idea of this project was to generate a payload bridge for the DJI Phantom 3 that can carry any device, such as lights, cameras or 360 cameras (what I built it for).

THIS DESIGN WAS DONE WITHOUT A PHANTOM 3. I GOT MANY REQUESTS TO CREATE A PHANTOM 3 BRIDGE, SO I WAIT TO GET CONFIRMATION THAT IT FITS.

For mounting cameras - to avoid the yellow effect - a damper is required between the camera mount and the payload bridge. Additionally, I recommend to secure the camera mount with the bride with 2 cable binders through the central hole.

Besides the printed part you need to purchase the 1/4" screws and the dampers.
You can find them here:
Screws: https://www.amazon.de/MENGS-Schraube-Edelstahl-Einbeinstativ-Schnellwechselplatte/dp/B00IXDECV4/ref=pd_sim_421_5?_encoding=UTF8&psc=1&refRID=1GJV2T2Q8TTXAMB66AWT

Dampers: https://www.dronematters.com/rubber-damper-s-black-526.html
or http://www.rakuten.de/produkt/pmt-10x-mini-daempfer-gummi-kamera-anti-vibration-shock-absorber-f-2