Phantom 4 Leg Extensions

Another set of leg extensions for the Phantom 4. They don't need any zip ties or anything else.
There are two sets. The shorter ones extend about 80mm. The longer ones about 110mm.

You must be careful when putting these on or removing them. As you know, the vertical part of the landing skids get bigger as they go up. These were designed to go on the vertical shaft first, at the bottom of the shaft where it's smaller. Then slide it up to clip on the horizontal skid portion.

To remove, slide down the vertical shaft (the landing skid horizontal portion will pop off first), keep sliding down until the shaft is narrow enough to release the extension.

If you do not, you will almost certainly break them. But if put on and removed properly, they won't break. That's just the nature of the shape of the shaft.

It is a tight fit, as they need to be.

I have made some in 910 Alloy and PLA. If you do work them properly, the PLA will be fine, but the Alloy has a little more fl