Phase Dock Workbench 1007 PC Board Holder

I have to give credit where credit is due. I did not design this PC Board hold . I modified a design that I found on Printables.com. I was looking for something that would mount on my Phase Dock Workbench 1007. It was designed by a very talented person named Squinn.

I reduced the over all size by 25% to reduce the holder foot print on my Workbench 1007. To this end, I also removed the feet. I added recessed screw holes (4mm) and I reduced the height of the stands so entire holder will fit under the clear cover. The holes in the slide rail line up with the 4mm mounting holes in the base. When not in use, all the parts will fit in the parts organizer that came with my Workbench. It seems to work pretty well, when I used this set up to build a QMX+ transceiver.

Two hints:
1. Let the PC board slide all the way down so it is touching the Workbench base. I hope you enjoy this project!
2. The parts come out a little tight sometimes. (Depending on your printer.) It that