Phasmophobia Tarot Cards

Tarot cards from the game Phasmophobia made with Fusion360 and HueForge. Included is a 3mf file for the P1S with AMS. I slowed the speed down for the first layers because I used an effects plate and wanted a good finish, but feel free to change this setting. If you want to print it on another printer with a different build plate size or without an AMS, I included the stls. For all the tarot card stls, follow the instructions below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Gray At layer #20 (1.68mm) swap to Jade White for the rest. If you have some stringing, you can use a heat gun or hairdryer to remove most of it.