Phoenix ashtray

##Phoenix ashtray:
- For personal/travel usage
- With groove for sealing rubber (For a regular hair band with a diameter of 4 cm)
- Bayonet thread

###Print Settings:
- **Material:** ASA
- **Flow rate:** 96% (But first layer at 110%)
- **Nozzle diameter:** 0.6 mm (recommended)
- **Layer height:** 0.2 mm
- **Perimeters:** 3 (With 0.4 noozle use 4 perimeters)
- **Solid layers:** Top: 6, bottom: 4
- **Infill:** Honeycomb at 30%
- **Bottom layer pattern:** Hilbert Curve
- **Brim:** 4 mm
- **Print speed:** 30 mm/s
- **Print orientation:** As in .stl files
- **Support:** No

###Benefits of printing:
- **Chamber**
- **Heated chamber at 45°C, Bed 90°C**
- **Smooth PEI bed plate, 3DLack**
- **Bed probe and Z offset -0.1 mm (for printing the first layer under moderate pressure)**

- *If you don't have any of the benefits, you can use **ASA_anti-warpi