MakerWorld
Hueforge & Lithophane
Voir le modèle
PHOENIX HUEFORGE
20
Téléchargements
21
Likes
13
Makes
Project: poenix hueforge.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 270.9x270.9mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Orange At layer #20 (1.68mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !