Thingiverse
Phoenix UAS mRID
por CBRrunner
6
Descargas
5
Likes
0
Makes
Posting the model for the Phoenix UAS mRID, remote ID broadcast module so you, the community can design custom mounting solutions for your frames.
https://www.phoenixuas.us/
Phoenix UAS mRID is a FAA approved remote ID module designed to be small, light, and convenient, while being focused on the needs of the FPV, and greater UAS community.
The mRID is a transmission module that takes a GPS input from an m10 GPS and transmits the appropriate RID message. The mRID can also pass GPS data over MSP and pass through i2c bus magnetometer data to the FC for BetaFlight and iNav (Users should always verify functionality of GPS enhanced flight modes and RTH prior to relying on them for normal flight).
Features:
-FAA compliant remote identification broadcast module
-Small formfactor (24mm x 14mm x 8mm)
-Multiple power options (5v from flight controller, 1S battery, USB)
-Four status LED's (power, GPS lock, failure indication, telemetry passthrough heartbeat)
-Broadcast range >1
https://www.phoenixuas.us/
Phoenix UAS mRID is a FAA approved remote ID module designed to be small, light, and convenient, while being focused on the needs of the FPV, and greater UAS community.
The mRID is a transmission module that takes a GPS input from an m10 GPS and transmits the appropriate RID message. The mRID can also pass GPS data over MSP and pass through i2c bus magnetometer data to the FC for BetaFlight and iNav (Users should always verify functionality of GPS enhanced flight modes and RTH prior to relying on them for normal flight).
Features:
-FAA compliant remote identification broadcast module
-Small formfactor (24mm x 14mm x 8mm)
-Multiple power options (5v from flight controller, 1S battery, USB)
-Four status LED's (power, GPS lock, failure indication, telemetry passthrough heartbeat)
-Broadcast range >1
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!