MakerWorld

Other Tools

Phone stand/holder

by 3Djustworks · Other Tools

0 Downloads

1 Likes

0 Makes

this is a phone stand that can be filped into movie mode/side mode and it can fit the USB cable so u can charge it at the same time!!! this model is recomendded to be printed with PLA and takes 4.5 hours to print.Boost Mepls boost me

phone stand iphone gadget iphone phone iphone stand easy a1 mini no ams no support

Category

Other Tools

Source

MakerWorld

Published

14.03.2026

Updated

15.03.2026

What you need to print this: Beginner Medium confidence

Why?

no supports · 2 colors

Support-free Single piece 2 colors / AMS

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Colors

2 (AMS/MMU recommended)

Est. print time

4.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Phone stand/holder need supports when printing?

No supports needed for Phone stand/holder — it's designed to print clean off the bed.

How long does it take to print Phone stand/holder?

According to the design notes, Phone stand/holder takes approximately 4.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Phone stand/holder available in?

Phone stand/holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Phone stand/holder free to download?

Yes, Phone stand/holder is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Phone stand/holder

Similar Models

Add to Collection