Pi 4 B ESD Case

DescriptionMakerworld will not let me share with custom filament, if you print in ESD from the link you MUST change the settingsat the end off all this I have the screen shots for the filament settings. If you print without cooler settings and what not, it will weld to you textured PEI plate and screw it up. Pi 3B+ is herePi 3 B is here This case is specifically meant for the Pi 4 B. I do not use the GPIO pins outside the case and the other do and it drives me insane. The case as shown is printed in PETG ESD. This case is designed to use this common 30x30 fan. The filament is this good but hard to not stick filament by PolyMaker. I have profiles, one with Vesa 100 mount and another that is just the case. I am working on other Pi variants, and hopefully I get them done and update them here. The case is designed for 1 ¼ 4-40 screws. I guess you could use 3x35mm screws, but the ones that would thread the hole would also thread into the Pi PCB board; in my test this didn't create an is