Thingiverse

Pi 4 case with camera (version 2) mount

by grumbler

3 Downloads

0 Likes

0 Makes

Just my design of a pi case with a camera support, its not perfect but works for me.
Needed to drill out the holes in the pi to accept 3mm allen hex bolts, the same as with the camera as well (do so at your own risk :) )

Attached to the printer frame with 2 5mm allen hex bolts with 5mm t nuts

The arm uses 5mm bolt and nut and one 5mm bolt

Its a pi 4 and the camera is the version 2

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format