Thingiverse
Pi Camera (Fits Voron 2.4) HDMI Support
par th3fallen
66
Téléchargements
26
Likes
0
Makes
Edited to work with https://www.amazon.com/dp/B06XDNBM63?ref=ppx_pop_mob_ap_share
####### UPDATED V3 #######
Made a new solution for the flexcable path so the mount can be placed further away from the bed. So now there's no risk for the toolhead colliding with it.
##########################
Mounts on the extrusion in the front of the bed.
Holds the flex cable tight and folds away easily when needed.
You need:
3 x M3x20
3 x M3 Heat set inserts (or regular nuts + longer screws will probably work too)
2 x M3x8 + T-nuts for mounting to extrusion
On Voron 2.4 beware so that your hotend doesn´t crash into the mount during QGL. It´s a close call but this gives the best camera angle.
Camera casing is remixed from link.
####### UPDATED V3 #######
Made a new solution for the flexcable path so the mount can be placed further away from the bed. So now there's no risk for the toolhead colliding with it.
##########################
Mounts on the extrusion in the front of the bed.
Holds the flex cable tight and folds away easily when needed.
You need:
3 x M3x20
3 x M3 Heat set inserts (or regular nuts + longer screws will probably work too)
2 x M3x8 + T-nuts for mounting to extrusion
On Voron 2.4 beware so that your hotend doesn´t crash into the mount during QGL. It´s a close call but this gives the best camera angle.
Camera casing is remixed from link.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !