Pi Camera Mount

This mounting bracket will hold a Raspberry Pi camera (2) above and to the right of the print bed on your Creality Ender 3. It will slot into the extrusion on the right hand side of the controll LCD. I have a modified LCD but should fit with the standard one also.

The bracket was designed from scratch in Fusion360 and the extrusion mount is a very tight fit with no slop. The dovetail joint again is supposed to be very tight, be careful when mating the two pieces, once together you will have a hard time seperating them (no glue required). The end of the bracket could hold any light camera with a horizontal mounting screw but was specifically designed for the PiCamSwivel to give tilt adjustment and pan adjustment. Holes are for M3 bolts so you will need two M3 nuts and bolts to mount the PiCamBack to the PiCamSwivel and then to the CameraMountMk3.

The PiCamFront and PiCamBack are a rework from 'Creality Ender 3 Pi Cam Mount
by Modmike Apr 30, 2018' on https://www.thingiverse.com/