Thingiverse
Pi Camera Mount - Universal - Snap fit
par LittleHobbyShop
101
Téléchargements
57
Likes
4
Makes
Simple but effective mount for the Raspberry Pi Camera.
- Snap fit camera board case.
- Hardware free adjustment with printed wing nuts.
- Profile mount takes 2 x M3 Socket Cap screws. 6-8mm long recommended for 2020/V-slot profile mounting.
All threads are ISO M14 if you wanted to add accessories or design a different mount plate.
No support required. There is a short bridge on the camera case that all printers should be able to handle.
Print as many or as few arms as you need with extra wing nuts as required. Pictures show 2x arms and 4x M14 Nuts, one each of everything else.
- Snap fit camera board case.
- Hardware free adjustment with printed wing nuts.
- Profile mount takes 2 x M3 Socket Cap screws. 6-8mm long recommended for 2020/V-slot profile mounting.
All threads are ISO M14 if you wanted to add accessories or design a different mount plate.
No support required. There is a short bridge on the camera case that all printers should be able to handle.
Print as many or as few arms as you need with extra wing nuts as required. Pictures show 2x arms and 4x M14 Nuts, one each of everything else.
LittleHobbyShop publie également sur
11 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
