Thingiverse
Pi-Hole-RackPi-Plugable USB - oled screen
von cIPA28
10
Downloads
5
Likes
0
Makes
Rack support for Raspberry Pi zero / zero W - Plugable USB 2.0 OTG and OLED screen 28x32 OLED 0,91 "SSD1306.
!!!!! attention this support involves the modification of the rack frame because the oled screen and the LAN socket protrude from the fixing guides as shown in the photo, you have to sand the rack frame a bit as shown in the photo, the red circles are the parts to be removed while the lines green are the rack rails !!!!!
install Pi-hole: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pi-hole
Install Pi-Hole screen oled: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pioled
!!!!! attention this support involves the modification of the rack frame because the oled screen and the LAN socket protrude from the fixing guides as shown in the photo, you have to sand the rack frame a bit as shown in the photo, the red circles are the parts to be removed while the lines green are the rack rails !!!!!
install Pi-hole: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pi-hole
Install Pi-Hole screen oled: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pioled
cIPA28 veröffentlicht auch auf
48 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!