Thingiverse

pi-like-stack

di BreadMakesYouFull

2 Download

2 Likes

0 Makes

# pi-like-stack

Yet another way to stack pi-like or other SBCs (single board computers) on top of one another.

**For a standard 40pin raspberry pi A/B or similar board you probably want ``full.stl``**

https://github.com/BreadMakesYouFull/pi-like-stack

The default board size is for 40-pin like A/B model mainline pi-like devices.
85mm x 56mm x 20mm, with standoffs 2.5mm diameter.

Each layer is 100mm x 75mm.

Printed without-support at 60% infill (PLA)

## Requires

* Openscad (or use the pre-made STLs)

## Quickstart

```
openscad ./pi_like_stack.scad
```

## LICENSE

openscad file & project - MIT : pi_like_stack_scad_MIT.txt

STL files - CC BY-SA 4.0 : stls.txt

arduino arduino case case customizable customizer openscad rack raspberry Raspberry Pi Raspberry pi 3 raspberry pi case Raspberry Pi Zero raspi RasPi 4 stack stackable stacking

Fonte

Thingiverse

Cosa serve per stampare: Principiante Bassa affidabilità

Pezzo unico

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 0/3

Stampante

FDM / FFF

Formato file