Thingiverse
Pi TV Mount
von dumbo0001
2
Downloads
2
Likes
0
Makes
Allows a Raspberry Pi case with keyholes to be mounted at the back of a Samsung UE55HU7500 TV using the vent holes that are at the back of the TV.
This is my first custom modeled part.
As the vent hooks and the screws the Pi case will be mounted on are on both sides of the back plate I used a snap fit to be able to print the screws and click on the back plate without glue.
There is probably too much space between screws and holes but it is acceptable for my first custom model.
#### Additional notes:
I didn't use a successful print of the screws. They got knocked by my printer nozzle but I just used the almost finished part.
This is my first custom modeled part.
As the vent hooks and the screws the Pi case will be mounted on are on both sides of the back plate I used a snap fit to be able to print the screws and click on the back plate without glue.
There is probably too much space between screws and holes but it is acceptable for my first custom model.
#### Additional notes:
I didn't use a successful print of the screws. They got knocked by my printer nozzle but I just used the almost finished part.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!