Slicer Discord
Pi Zero 2 W Case – 3D printable model from MakerWorld MakerWorld
Other Tools

Pi Zero 2 W Case

50 Downloads
9 Likes
28 Makes
Go to Model
Raspberry Pi Zero 2 W case i designed for use in my Ender 3 Pro upgrade project. Requires 4pcs m2.5*8 bolts and hex nuts, could use m2.5*10 and some washers to space the bolt off of the PiOR omit the nuts, and print the direct thread body, which has holes sized to allow the bolts to screw into the print.Also, 3mm bolt holes are provided for mounting. in my case to an aluminum extrusion using t nuts. I printed on .12mm layer height using Arachne wall generation. The Pi fits snugly and the lid fits well Added a vented lid with accommodations for a heat sink. I used this hardware kithttps://amzn.to/3SdTCWC
Category
Other Tools
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
0.12mm layers
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 2/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Polycarbonate
Layer height
0.12 mm
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection