Hobby&DIY
Ver Modelo
Pi Zero Case with Waveshare Ethernet/USB HUB
21
Descargas
8
Likes
0
Makes
I decided build a print server for my old printers. I wanted to make a case that was mountable, but also support the Waveshare Ethernet/USB HUB as I needed more than 1 USB port for my set up. There were a few cases out there, but nothing that fully filled the role I needed. So, I blended 4 different designs into this one. This case is mountable with the top being secured on by m3 nuts instead of snapping on. Depending on your printer and how dialed in it is, they will either drop in, or if like me, I pressed them in. Installation of all the boards is pretty straight forward: Pi Zero on the bottom Insert screws from the bottom and then place spacers in Insert Waveshare Ethernet/USB HUB Put top on, screw closed Enjoy! Link to Waveshare Ethernet/USB HUB: https://www.amazon.com/gp/product/B07T35X4P4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Kovs también publica en
18 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!