Thingiverse
Pi Zero - Elegoo Mars Holder
door retznutz
0
Downloads
0
Likes
0
Makes
A simple holder for a Raspberry Pi Zero W that attaches to the side of your Elegoo Mars 2 resin printer. Wanted something compact and attached for the Mariner install I was doing (https://github.com/luizribeiro/mariner - remote file and printer status).
If you found Mariner from here, be aware that the version currently in github only works with Raspberry Pi OS Buster. Follow the steps below to make it work:
1. Download buster from https://downloads.raspberrypi.com/raspios_lite_armhf/images/raspios_lite_armhf-2021-05-28/
2. Install Buster with Etcher - https://etcher.balena.io/
3. Follow the directions here: https://mariner.readthedocs.io/en/latest/software-setup.html
4. Before running this line `curl -sL gpg.l9o.dev | sudo apt-key add -` run this instead to register the GPG key `sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys BF6F8043AC280E02`
5. This line `dtoverlay=dwc2` should be under the [all] section in the /boot/cmdline.txt
6 Everything else works as
If you found Mariner from here, be aware that the version currently in github only works with Raspberry Pi OS Buster. Follow the steps below to make it work:
1. Download buster from https://downloads.raspberrypi.com/raspios_lite_armhf/images/raspios_lite_armhf-2021-05-28/
2. Install Buster with Etcher - https://etcher.balena.io/
3. Follow the directions here: https://mariner.readthedocs.io/en/latest/software-setup.html
4. Before running this line `curl -sL gpg.l9o.dev | sudo apt-key add -` run this instead to register the GPG key `sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys BF6F8043AC280E02`
5. This line `dtoverlay=dwc2` should be under the [all] section in the /boot/cmdline.txt
6 Everything else works as
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!